RCD PRESS
The RCD (Rotating Control Device) Press is used to install or remove a tubular onto an RCD Head. The head is used with Managed Pressure Drilling (MPD) and is conventionally installed on the rig floor. This method of installation can cause a variety of handling and safety concerns. When installing ahead on the rig floor, the rig cost is Non-Productive Time (NPT) so by taking this operation offline we are able to remove the hazards and costs associated.
#RedefineTRS™
FEATURES
Safe and efficient installation process
Reduces hazards and NPT on the rig floor
Inline time savings equate to a more productive operation
Previous
Next
SPECIFICATIONS
Heading #3 | Heading #3 |
|---|---|
PRESS STROKE LENGTH | 36” (914.4 mm) |
OVERALL HEAD LENGTH (MAXIMUM) | 52” (1,320 mm) |
HEAD OD (MAXIMUM) | 24” (609 mm) |
TUBULAR OD (RANGE) | 3 – 7.63” (76.2 – 193.8 mm) |
UNIT PRESSURE RATING (MAXIMUM) | 3,000 PSI (20,700 kPa) |
HYDRAULIC FLOW REQUIREMENTS | 5 – 70 gal/min (19 – 265 L/min) |
ALL SERVICES, ALL LOCATIONS
CONTACT US TODAY